Milesight Technology MS-C5374-PB - Advanced Settings; Alarm

53
Current System Time
Current date&time of the system
Set the System Time
Table 4-4-17 Description of the buttons
Parameters
Function Introduction
Time Zone
Choose a time zone for your location.
Daylight Saving time
Enable the daylight saving time.
NTP Sync
Regularly update your time according to the interval time.
Synchronize with
computer time
Synchronize the time with your computer.
NTP server
Input the address of NTP server.
Manual
Set the system time manually.
4.5 Advanced Settings
4.5.1 Alarm
Motion Detection
Step1: Check the checkbox to enable the motion detection;
Step2: Set motion region;