Settings steps are shown as follows:
Step1: Choose a line number;
Step2: Enable Line Crossing Detection and define its direction;
Step3: Draw detection lines;
Step4: Set detection schedule;
Step5: Set alarm action;
Step6: Set alarm settings.
Note:
Milesight allows to set up to four lines at a time. There are three direction modes to choose for
triggering alarm. “A→B” means when there is any object crossing the line from the “A” side to the
“B” side, the alarm will be triggered. “B→A” vice versa. “A ↔ B” means that the alarm will be
triggered when objects cross line from either side.
Loitering
To Next Page
