LoRaWAN Frequency Settings:
Go to “Settings -> LoRaWAN Settings” of ToolBox App to select supported frequency and select
channels to send uplinks. Make sure the channels match the LoRaWAN
®
gateway.
If frequency is one of CN470/AU915/US915, you can enter the index of the channel that you
want to enable in the input box, making them separated by commas.
Examples:
1, 40: Enabling Channel 1 and Channel 40
1-40: Enabling Channel 1 to Channel 40
1-40, 60: Enabling Channel 1 to Channel 40 and Channel 60
All: Enabling all channels
Null: Indicates that all channels are disabled
To Next Page
Loading...
