Milesight MS-C5364-PB - SIP Settings and Alarm Phone List

76
Table 4-5-12 Description of the buttons
Parameters
Function Introduction
Unregistered/
Registered
SIP registration status. Display “Unregistered” or “Registered”
Enable
Start or stop using SIP
Register Mode
Choose to use Enable mode or Disable mode. Enable mode means to use SIP with
register account. Disable mode refers to use SIP without register account, just use
the IP address to call.
User ID
SIP ID
User Name
SIP account name
Password
SIP account password
Server Address
Server IP address
Server Port
Server port
Connection
Protocol
UDP/TCP
Video Stream
Choose the video stream
Max Call Duration
The max call duration when use SIP
Note: SIP supports Directly IP call.
Alarm Phone List