Milesight Network camera - Page 42

Quick Start Guide
www.milesight.com
38
a. Start→ Control Panel→ Network and Internet Connection→ Network Connection→ Local
Area Connection, and double click it. (Refer to Figure 8-8);
Figure 8-8
b.Click “Advanced”, and then click “IP settings”→ “IP address”→ “Add” (See Figure 8-9). In
the pop-up window, enter an IP address that in the same segment with Milesight Network
Camera ( e.g. 192.168.5.61, but please note that this IP address shall not conflict with the
IP address on the existing network);
Figure 8-9