OM-225 428 Page 7
SECTION 3 − SPECIFICATIONS
3-1. Specifications
Model
A-200 (WP-26) A-200V (WP-26V)
Amperage Rating 200 Amps W/Argon Gas At 60% Duty Cycle DCEN; 150 Amps W/Argon Gas At 60%duty Cycle ACHF
Cooling Method Air
Tungsten Size .020 Thru 5/32 in. (0.5 Thru 4.0 mm)
Cable Options 12.5 ft (3.8 m) or 25 ft (7.6 m) One-Piece Rubber
12.5 ft (3.8 m) or 25 ft (7.6 m) Two-Piece Rubber
Dimensions Length: 8 in. (203 mm);
Handle Diameter: 1.13 in. (29 mm)
Weight: 9.1 oz (258 g)
Length: 8.5 in. (216 mm);
Handle Diameter: 1.13 in. (29 mm)
Weight: 10.8 oz (306 g)
Model
A-200F (WP-26F) A-200FV (WP-26FV)
Amperage Rating 200 Amps W/Argon Gas At 60% Duty Cycle DCEN; 150 Amps W/Argon Gas At 60%duty Cycle ACHF
Cooling Method Air
Tungsten Size .020 Thru 5/32 in. (0.5 Thru 4.0 mm)
Cable Options 12.5 ft (3.8 m) or 25 ft (7.6 m) One-Piece Rubber
12.5 ft (3.8 m) or 25 ft (7.6 m) Two-Piece Rubber
Dimensions Length: 8.5 in. (216 mm);
Handle Diameter: 1.13 in. (29 mm)
Weight: 11.05 oz (313 g)
Length: 9 in. (229 mm);
Handle Diameter: 1.13 in. (29 mm)
Weight: 12.95 oz (367 g)
3-2. Duty Cycle
sb1.5* 8/93
60% Duty Cycle At 200 Amperes Using Argon Gas w/DCEN
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
0
10
Minutes
Definition
NOTICE − Exceeding rated amperage can damage torch and void warranty (see Section 3-1).
6 Minutes Welding 4 Minutes Resting
60%dutycycle
To Next Page
Loading...
Need help?
General
