Miller Big Blue 800 User Manual

OM-244 023 Page 21
SECTION 5 − INSTALLATION
5-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the front. Use rating label to determine input power
requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
! Do not move or operate unit
where it could tip.
! Always securely fasten weld-
ing generator onto transport
vehicle or trailer and comply
with all DOT and other applica-
ble codes.
NOTICE − Do not install unit where
air flow is restricted or engine may
overheat.
 See Section 4-3 for lifting eye
rating.
 See Section 5-3 for mounting in-
formation.
install3 2008-01 − Ref. 800 652 / Ref. 800 477-A / 803 274 / 804 712
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
18 in.
(460 mm)
Movement
5
-2. Installing Welding Generator
OR OR
OR
Location/Airflow Clearance
OR

Miller Big Blue 800 Specifications

General

Brand	Miller
Model	Big Blue 800
Category	Inverter
Language	English