Miller Maxstar 161 STL User Manual

TABLE OF CONTENTS
SECTION 10 − HIGH FREQUENCY 32...........................................................
10-1. Welding Processes Requiring High Frequency 32............................................
10-2. Installation Showing Possible Sources Of HF Interference 32...................................
10-3. Recommended Installation To Reduce HF Interference 33.....................................
SECTION 11 − SELECTING AND PREPARING A TUNGSTEN FOR DC OR AC WELDING WITH INVERTER
MACHINES 34................................................................................
11-1. Selecting Tungsten Electrode (Wear Clean Gloves To Prevent Contamination Of Tungsten) 34......
11-2. Preparing Tungsten Electrode For DC Electrode Negative (DCEN) Welding
Or AC Welding With Inverter Machines 34...................................................
SECTION 12 − STICK WELDING (SMAW) GUIDELINES 35.........................................
COMPLETE PARTS LIST − Available at www.MillerWelds.com
WARRANTY

Miller Maxstar 161 STL Specifications

General

Input Voltage	120/240 V
Amperage Range	20 - 160 A
Input Phase	Single Phase
Weight	13 lb (5.9 kg)
Processes	Stick