Miller T94 Series Manual

OM-255503 Page 10
 The auto-darkening lens
on T94 Series Helmets
turns on (darkens) auto-
matically when welding
begins and turns off
when welding stops.
1 Mode Button
Press Mode button to check
if the lens is working properly
and to begin Mode and Info
adjustments.
When the Mode button is
pressed, the helmet control
display will appear. Do not
use the helmet if the lens
does not function as de-
scribed. (See Section 10,
Troubleshooting.)
2 Grind / Low Battery Light
The Grind / Low Battery light
blinks when the lens is in the
Grind mode. Light stays on
when 2−3 days of battery life
remain.
If battery power is low, re-
place with CR2450 lithium
battery (1 required − Miller
Part No. 217043). See Sec-
tion 7.
1
2
260482-4
4-3. Mode Button And Grind / Low Battery Light

Miller T94 Series Specifications

General

Brand	Miller
Model	T94 Series
Category	Motorcycle Accessories
Language	English