To Next Page

To Previous Page

TABLE OF CONTENTS

SECTION 1 − WELDING HELMET SAFETY PRECAUTIONS −

READ BEFORE USING 1........................................................

1-1. Symbol Usage 1............................................................

1-2. Arc Welding Hazards 1.......................................................

1-3. Proposition 65 Warnings 2....................................................

1-4. Lens Shade Selection Table 3.................................................

1-5. Principal Safety Standards 3..................................................

SECTION 2 − CONSIGNES DE SÉCURITÉ POUR

LE CASQUE DE SOUDAGE − LIRE AVANT UTILISATION 4..........................

2-1. Symboles utilisés 4..........................................................

2-2. Dangers relatifs au soudage à l’arc 4...........................................

2-3. Proposition californienne 65 Avertissements 5....................................

2-4. Tableau de sélection d’opacité de lentille 6.......................................

2-5. Principales normes de sécurité 6...............................................

SECTION 3 − SPECIFICATIONS 7.................................................

SECTION 4 − OPERATING INSTRUCTIONS 8......................................

4-1. Helmet Configurations 8......................................................

4-2. Helmet Controls 9...........................................................

4-3. Mode Button And Grind / Low Battery Light 10.....................................

4-4. Mode Control Settings 11......................................................

4-5. Variable Shade Control 12.....................................................

4-6. Lens Delay Control 13.........................................................

4-7. Sensitivity Control 14..........................................................

4-8. Typical Lens Adjustment Procedure 15...........................................

4-9. Info Control Button 16.........................................................

4-10. Clock Control 17.............................................................

4-11. Arc Time And Arc Count Control 18..............................................

SECTION 5 − ADJUSTING HEADGEAR 19..........................................

5-1. Adjusting Headgear On T94 Series Helmets 19....................................

SECTION 6 − REPLACING THE GRINDING SHIELD OR LENS COVERS 20.............

6-1. Replacing Grinding Shield On T94i Helmet 20.....................................

6-2. Replacing Lens Covers On Quick Release Helmets 21.............................

SECTION 7 − REPLACING THE BATTERY 22.......................................

SECTION 8 − INSTALLING OPTIONAL MAGNIFYING LENS 23........................

SECTION 9 − MAINTENANCE 23..................................................

SECTION 10 − TROUBLESHOOTING 24............................................

SECTION 11 − PARTS LISTS 25...................................................

SECTION 12 − LIMITED WARRANTY 28............................................

Miller T94 Series Manual

Other manuals for Miller T94 Series