OM-246 377 Page 3
SECTION 2 − SPECIFICATIONS
Specification Titanium 7300Helmet Titanium 9400Helmet Titanium 1600 Helmet
Viewing Field 97 x 47 mm
(3.81 x 1.85 in)
97 x 60mm
(3.81 x 2.62 in)
102 x 102 mm
(4 x 4 in.)
Reaction Time 0.0000500 sec (1/20,000) −−
Available Shades Darkened State:
No. 8 − No. 13
Light State: No. 3
Provides continuous UV and IR protection
Standard: No. 10
Available: No. 9 − 13
Provides continuous
UV and IR protection
Upgradeable to auto-
darkening lens
Sensitivity Control Adjusts for varying
ambient light and
welding arc
−−
Delay Control Slows lens dark-to-light state between 0.1 and
1.0 seconds
−−
Automatic Power
Off
Shuts lens Off 15−20 minutes after last arc is
struck
−−
Low Battery
Indicator
Red LED light illuminates to indicate 2−3 days
remaining battery life
−−
Power Supply CR2450 lithium battery (Miller Part No.
217 043)
−−
Sensors Independent/Redun-
dant (Three)
Independent/Redun-
dant (Four)
−−
Operating
Temperature
14F to 131F / −10C to +55C
When stored in extremely cold temperatures,
warm helmet to ambient temperature before
welding.
−−
Storage
Temperature
−4F to 158F / −20C to +70C
When stored in extremely cold temperatures,
warm helmet to ambient temperature before
welding.
−−
Total Weight 481.9 g (17 oz.) 510.3g (1lb 2oz.)
Standards ANSI Z87.1 and CSA ANSI Z87.1 and
DIN/CSA/TUV
Warranty 2 years from date of purchase (see Section 13)
The helmets in this manual are covered by one or more of the following patents:
U.S. Patent − No. 6,552,316, No. 6,483,090, No. 6,614,409
U.S. Patent Application − No. 29/223,100, No. 11/053,977
DE. Patent − No. 199 59 944 C2, No. 199 59 945 C2
FR. Patent − No. 9916004
To Next Page
Loading...
