To Next Page

To Previous Page

TABLE OF CONTENTS

SECTION 1 −SAFETY PRECAUTIONS FOR GTAW TORCHES − READ BEFORE USING 1............

1-1. Symbol Usage 1.......................................................................

1-2. Arc Welding Hazards 1.................................................................

1-3. Proposition 65 Warnings 2...............................................................

1-4. Principal Safety Standards 2.............................................................

1-5. EMF Information 2.....................................................................

SECTION 2 −DEFINITIONS 3..................................................................

SECTION 3 − SPECIFICATIONS 4..............................................................

3-1. Specifications Table 4...................................................................

3-2. Duty Cycle 5..........................................................................

SECTION 4 − INSTALLATION 5................................................................

4-1. Required Torch Parts And Torch Assembly − CS Series Torches 5.............................

4-2. Required Torch Parts And Torch Assembly − WP Series Water-Cooled Torches 6................

4-3. Required Torch Parts And Torch Assembly − WP Series Air-Cooled Torches 6...................

4-4. Remote 6 Receptacle Information For 15 Volts DC 7.........................................

4-5. Remote 14 Receptacle Information For 15 Volts DC 7........................................

4-6. Remote 14 Receptacle Information For 24 Volts AC 7........................................

4-7. Connecting Torch 8.....................................................................

SECTION 5 − MAINTENANCE & TROUBLESHOOTING 10.........................................

5-1. Routine Maintenance 10.................................................................

5-2. Troubleshooting 10......................................................................

SECTION 6 − ELECTRICAL DIAGRAMS 11.......................................................

SECTION 7 − SELECTING AND PREPARING A TUNGSTEN FOR DC OR AC PHASE

MACHINE WELDING 12........................................................................

7-1. Selecting Tungsten Electrode (Wear Clean Gloves To Prevent Contamination Of Tungsten) 12......

7-2. Preparing Tungsten Electrode For Welding With Phase Control Machines 12.....................

SECTION 8 − GUIDELINES FOR TIG WELDING (GTAW) 13.........................................

8-1. Positioning The Torch 13.................................................................

8-2. Torch Movement During Welding 14........................................................

8-3. Positioning Torch Tungsten For Various Weld Joints 14........................................

Miller WP Series User Manual

Questions and Answers: