Need help?Do you have a question about the Miller XMT 304 CC/CV and is the answer not in the manual?
General| Rated Output | 300 A at 32 VDC, 60% Duty Cycle |
|---|---|
| Welding Amperage Range | 5 - 400 A |
| Output Current Range (CC) | 5 - 400 A |
| Processes | Stick (SMAW), TIG (GTAW), MIG (GMAW) |
| Output Voltage Range (CC) | 10 - 32 V |
| Dimensions | 12.5 in (318 mm) W |
| Input Power | 208/230/460 V, 3- or 1-phase |
Explains hazard symbols and details dangers related to arc welding operations.
Covers risks from fumes, gases, arc rays, fire, explosions, and sparks during welding.
Details symbols for installation, operation, maintenance, and specific hazards like HF interference.
Covers California Prop 65, safety standards, and EMF information for user safety.
Explains the meaning of various warning labels and symbols found on the equipment.
Defines the WEEE label and provides a comprehensive list of symbols and their meanings.
Covers CE product info, serial number location, and technical specifications for the unit.
Details duty cycle, overheating, and volt-ampere curves for understanding unit performance.
Covers dimensions, weight, location selection, cable sizing, and input power connection.
Details receptacle information, electrical service guide, and connecting 3-phase power.
Explains front panel controls, voltmeter, ammeter, and mode settings for operation.
Details mode switch settings for various welding processes and the Lift-Arc TIG procedure.
Covers routine maintenance tasks, cleaning the unit's interior, and troubleshooting displays.
Provides solutions for common operational problems like no weld output or erratic output.
To Next Page