Need help?Do you have a question about the Millipore Elix Essential 10 and is the answer not in the manual?
General| Type | Water Purification System |
|---|---|
| Model | Elix Essential 10 |
| Output Flow Rate | 10 L/h |
| Flow Rate | 10 L/h |
| Weight | 15 kg |
| Power Supply | 100-240 V, 50/60 Hz |
| Feed Water Quality | Potable water |
| Feed Water Requirement | 5 – 35 °C |
| Purification Technology | Reverse osmosis |
| Resistivity | >0.05 MΩ·cm |
| TOC | <500 ppb |
| Display | LCD display |
Essential safety guidelines, warnings, and symbol explanations for operating the water purification system.
Interpretation guide for all icons displayed on the system's screen to understand status and alerts.
Guide on accessing and adjusting various system parameters like date, time, rejection set points, and modes.
Step-by-step instructions for safely removing an exhausted Progard pack from the water system.
Step-by-step instructions for installing a new Progard pack and initiating its flush procedure.
Procedure for sanitizing RO membranes using chlorine tablets to prevent biofilm formation on the feed water side.
Procedure for cleaning RO membranes with pH cleaners to remove mineral scale and organic material buildup.
List of error codes, their meanings, and associated actions or contacts for system troubleshooting.
Troubleshooting steps for common errors, icons, and system malfunctions, including water leaks and pressure issues.
To Next Page