Need help?Do you have a question about the Millipore Elix Essential 3 and is the answer not in the manual?
General| Type | Laboratory Water Purification System |
|---|---|
| Flow Rate | Up to 15 L/h |
| Water Feed Pressure | 1-6 bar |
| Feed Water Temperature | 5 - 35 °C |
| Feed Water Type | Potable water |
| Power Supply | 100-240 V, 50/60 Hz |
| Technology | Reverse Osmosis (RO) |
| Particles >0.22 μm | < 1/mL* |
| Weight | 15 kg |
Details important safety precautions, symbols, and warnings for operating the water system.
Verifies all items are available before installation, listing unit, manuals, power supply, and accessories.
Explains system principles and defines operating status terminology like Tank Filling and Flush.
Details how to configure system parameters like SP 01, SP 02, Date, IP address, ECO, and ASM.
Guides on replacing the Progard pack when indicated, including removal and installation steps.
Explains using chlorine tablets for sanitization to reduce biofilm on RO membranes.
Details removing mineral scale or organic material using a pH Cleaner for RO membranes.
Lists and explains Yellow alert and Red alarm error codes, their meanings, and actions.
Provides guidance on troubleshooting common issues like water quality, low pressure, leaks, and temperature.
To Next Page