Need help?Do you have a question about the Millipore Elix Essential 15 and is the answer not in the manual?
General| Type | Water Purification System |
|---|---|
| Model | Elix Essential 15 |
| Feed Water Requirement | Potable tap water |
| TOC | < 30 ppb |
| Bacteria | < 1 CFU/mL |
| Flow Rate | Up to 15 L/h |
| Operating Temperature | 5-35 °C |
| Water Quality Standard | ISO 3696 Grade 2 |
| Resistivity at 25 °C | >5 MΩ·cm |
| Particles > 0.22 μm | <1/mL |
| Production Rate | 15 L/hour |
| Conductivity of Produced Water | <0.2 µS/cm (Type 2) |
| Installation | Bench-top or Wall-mounted |
| Power Supply | 100-240 V, 50/60 Hz |
Overview of the system's purification principle and terminology for operating statuses.
Guide on accessing and configuring various system parameters and settings.
Step-by-step instructions for removing and replacing the Progard® Pack.
Guidance on correctly installing a new Progard® Pack and initiating the flush process.
Procedure for performing chlorine sanitization of RO membranes to reduce biofilm.
Instructions for cleaning RO membranes using acid or base solutions to remove scale.
List of error codes displayed by the system, their meanings, and suggested actions.
Guidance on identifying and resolving common issues based on error codes or icons.
Detailed specifications for product water, flow rates, feed water quality, dimensions, and electrical requirements.
To Next Page