9
Configuration and function
The Front
The Rear
Carriage
The carriage carries the pen and
moves it up and down.
Power switch
The switch turn on/off the
power.( P.17, P.30)
Grit roller
The grit rollers operate in combination with
the pinch rollers to feed the sheet.
Platen
The sheet of media moves along
the platen.
Operation panel
The plotter is operated and functions are set
on the operation panel.( P.10)
Clamp lever
Pushing a lever down lowers
a pinch roller and retain the
sheet.
Pinch roller
The pinch rollers feed out the sheet while
pressing it against the grit rollers.
Clamp pressure lever
This lever adjusts the force by
which the clamp is held.
Tray
Small tools, such as a retractable
knife and other cutters, may be
placed on the tray.
USB interface connector
The USB interface connector.
Connected to the USB connector
of the host computer through a
USB interface cable.
(P.11)
AC inlet
The power cable is connected to
the AC inlet.( P.11)
To Next Page
Loading...
