3-44
When [Ink Level] is displayed
When quantity of the remaining 600 cc ink becomes low, a warning [Ink Level] appears.
Enter the weight of the cartridge with the Ink Level Set function.
● Using Ink Level Set function
1
If [Ink level] is displayed, remove the 600cc
cartridge and measure the weight of the 600cc
cartridge.
• Be sure to measure the weight of the eco case including the
600 cc ink pack.
2
Reset the 600 cc cartridge.
3
Press the key.
4
Pressing the keys input the
weight of the 600cc cartridge.
• Press the keys to move to another digit.
• Press the keys to input the weight.
5
Press the key.
• This machine recalculates usable amount of remaining ink by entering the weight of the 600 cc
cartridge.
• Ink Level Set function starts by resetting the 600 cc cartridge indicating [Ink Level] warning in the local
mode or remote mode (during waiting or printing).
• Weight the cartridge exactly down to the gram. Entering a larger weight than the actual one may cause
Nozzle Drop Out.
• Use the “E” display as a guide for replacing
the ink pack.
• If ink remains much in the ink pack even
when “E” is displayed, proceed to the Step 2
and the subsequent steps.
• Ink in the ink pack cannot be completely used
up. To prevent ink supply errors, about 30 cc
of ink must remain in the ink pack.
<LOCAL . 1> MMCCYYKK
InkLevel --L---E-
Displays the cartridge causing [Ink
Level] warning.
Upper line: Ink color being set
Lower line: Cartridge condition
“ - ” No error
“L” Ink Level Low
“E” Ink Level End
InkLevelSet ..C.....
Exec < > Cance l
InkLevelSet ..C.....
[1] 055
5 g
Displays the set number of times of
weight to the cartridge being operated.
InkLevelSet ..C.....
0555g OK ? :
e nt
To Next Page
Loading...
