Mimaki Europe B.V.
Sign Graphics Products
Continuous operation
• NRS (Nozzle Recovery System)
• 10 nozzles can be registered per 1 nozzle line
• NRS does not change the printing speed
• NRS does not work when:
• Printing in low pass modes
• Printing in some modes with MAPS3
• The position of the nozzle is not correct
Register the number
of missing nozzles
Replacing the clogged nozzles by
using other working nozzles
Nozzle check pattern
Clogged/Missing
nozzles
27
To Next Page
Loading...
