MIMAKI JV300-130 A - Page 4

iii
About Cleaning Solution ....................................................................4-2
Cleaning the Exterior Surfaces.......................................................... 4-2
Cleaning the Platen........................................................................... 4-2
Cleaning the Media Sensor............................................................... 4-3
Cleaning the Media Press ................................................................. 4-3
Replace the CP pad set .................................................................... 4-4
Cleaning or replace the pinch roller................................................... 4-4
About MAINTENANCE MENU ..................................................... 4-5
MAINTENANCE MENUs at-a-glance................................................ 4-6
Maintaining the Capping Station .................................................. 4-7
Cleaning the Wiper and Cap ............................................................. 4-7
Washing the Head Nozzle................................................................. 4-8
Washing the Ink Discharge Passage ................................................ 4-9
When the Machine Is Not Used for a Long Time .............................. 4-9
Cleaning the Ink Head and the Area around It ..........................4-11
Automatic Maintenance Function .............................................. 4-12
Setting the Refreshing Intervals ...................................................... 4-12
Setting the Cleaning Intervals and Type ......................................... 4-13
Fill up Ink ................................................................................... 4-13
Replacing consumables ............................................................. 4-14
Replacing the wiper......................................................................... 4-14
If a Waste Ink Tank Confirmation Message Appears...................... 4-14
Replacing the waste ink tank before the waste ink tank confirmation
message is displayed...................................................................... 4-16
Replacing the Cutter Blade ............................................................. 4-16
Chapter 5 Troubleshooting
Troubleshooting ........................................................................... 5-2
Power does not turn on ..................................................................... 5-2
The machine does not start printing.................................................. 5-2
Media get jammed / media is soiled.................................................. 5-2
Image quality is poor ......................................................................... 5-3
Nozzle is clogged .............................................................................. 5-3
Ink cartridge warning appears........................................................... 5-4
When the ink leakage occurs ............................................................5-4
Warning / Error Messages ........................................................... 5-5
Warning messages............................................................................ 5-5
Error messages................................................................................. 5-7
Chapter 6 Appendix
Specifications ............................................................................... 6-2
Machine specifications ...................................................................... 6-2
Ink specifications............................................................................... 6-3
Setting orders of ink cartridges .................................................... 6-4
Sheet for inquiry ........................................................................... 6-5