MIMAKI JV33 Series User Manual

2
Q Tools required for Maintenance
Q Surroundings of the heads ("Cleaning the heads and their surrounding parts" P. 4-16
of the Operation Manual)
The heads and their surroundings are the parts most liable to be tainted in this printer and if tainted, it could
cause adverse effects to the functions of the equipment and the results of the drawings. Moreover, as the head
itself uses very fine mechanisms, sufficient precautions are required for the care and maintenances.
1 Move the carriage to the left.
• Move the carriage referring to Step 1, P.4-16 of the Opera-
tion Manual.
2 Open the maintenance cover.
• Remove the 4 screws and open the maintenance cover.
3 Clean the head and the surrounding area.
• Gelled ink and dust could stick under the slider and the sur-
roundings of the head.
• Scrape them off with cotton rod etc. In this case, never rub
the nozzle portion of the head.
Clean with the cotton rod.
2. Daily care and maintenance
Item Name Product No.
Cotton rod
Maintenance cleaning liquid MS2/ES3/HS Kit (for solvent ink) SPC-0369
Cleaning liquid bottle kit (for Aqueos inks) SPC-0137
Wiper kit 33S SPA-0134
Maintenance
cover
Screws
Nozzle portion

MIMAKI JV33 Series Specifications

General

Print Technology	Piezo inkjet
Ink Type	Solvent ink
Print Head	On-demand piezo head
Resolution	1440 dpi
Print Speed	Up to 17.5 m²/h
Ink Colors	CMYK
Media Thickness	1 mm
Media Handling	Roll media
Interface	USB 2.0
Maximum Print Width	1, 610 mm (63.4")