MIMAKI SWJ-320 S2 - Page 143

© 2013 MIMAKI ENGINEERING CO.,LTD. 6.3.4 P.2
6.3.4 Cleaning of Linear Encoder Scale
R.1.1
1
2
3
4
5
6
7
8
3. Inside of scale cover.
•Remove the scale cover, and clean the inside of the cover to
wipe.
•Be careful so that the scale is not damaged by inclining it
which is so long, when it is removed.
•Use cleaning stick or cloth which is hard to occur of the waste
thread to clean.
MAINTENANCE MANUAL > Disassembly and Reassembly > Drive System > Cleaning of Linear Encoder Scale
Model SWJ-320S Issued
2013.02.15
Revised F/W ver. Remark
1.1
Rev.