MIMAKI SWJ-320 S2 - Replacement of the X-Axis Motor

© 2013 MIMAKI ENGINEERING CO.,LTD. 3.2.1 P.1
1
2
3
4
5
6
7
8
R.1.0
MAINTENANCE MANUAL > Workflow > Driving Parts > Replacement of the X-axis Motor
Model SWJ-320S Issued 2012.07.19 Revised F/W ver. Remark
1.0
Rev.
3.2.1 Replacement of the X-axis Motor
 List of replacement procedures
Item Work operation Description Ref.
Power OFF
1.

Power OFF Turning the main power OFF.
* Be sure to turn the main power OFF since the power
comes ON due to the sleep control if turned to OFF by
the power SW on the panel.
---
X-axis Motor
2. 
X-axis motor replacement
6.3.1
Adjustment
3.

Adjustment of the belt tension Adjusting the tension of X-drive belt.
4.3.3
For the power OFF, be sure to turn the main power OFF.
If the sleep function works accidentally during the operation, it is very dangerous.
X-axis Moter