MIMAKI SWJ-320 S2 - Machine Settings Overview

© 2013 MIMAKI ENGINEERING CO.,LTD. 4.2.11 P.2
4.2.11 CAPPING
R.1.0
1
2
3
4
5
6
7
8
5. Adjust the flushing position.
1) Press the []/[] key to move the carriage so that the car-
riage and station are just barely in contact.
2) Once the carriage and station are in contact, press the []
key 5 times. (Shift 0.5 to the left)
[]/[] : Move cap (adjust)
[ENTER] : Set
#CAPPING
FLUSHINGPOS.=2.0
Barely in contact position
Shift “0.5” to the left
from contact position.
Approximately 0.5 mm
-20.0~20.0
MAINTENANCE MANUAL > Adjustment > Adjustment Items > CAPPING
Model SWJ-320S Issued 2012.07.19 Revised F/W ver 1.0 Remark
1.0
Rev.