MIMAKI TS330-1600 - Page 147

Chapter 5 Using the XY Slitter
147
2
Select the detection method.
• "Auto Detect"(P. 147): To detect marks automatically
• "Entering Positions"(P. 149): To input the mark positions
Slit Position Detection
Auto Detect
Entering Positions
>
>
l
Explanation of marks
[1] 20.0 [2] 55.0 [3] 655.0 [4] 705.0 [5] 1305.0
Y slit register mark
Afterwards slitting mark
Guide line
(X cutter position)
X cutter positioning marks
Cut line
Slit position detection assistance mark
Distance from media edge
Auto Detect
1
Select [Auto Detect].
2
Select the color of the slitting marks.
• Select the color of the printed marks.
Select the color of the detection mark
Black
White
5