© 2011 MIMAKI ENGINEERING CO.,LTD.
4.2.17 P.1
1
2
3
4
5
6
7
8
R.1.0
4.2.17 REPLACE PARTS
Function
Displays the replacement history of the following parts/unit or registers replacement date thereof.
Parts subject to the replacement
Registration procedure
1. Select [REPLACE PARTS] from the operation menu.
2. Select [REGISTRATION].
3. Select the parts replaced and register the date and the part
number referring to the list shown above.
These items are used as standards for determining the part replacement period.
When a part in question is replaced, never forget to register the replacement date.
Type Contents of registration
PUMP Enter the date and the pump No.
CAP Enter the date and the cap No.
DAMPER Enter the date, head No, and the damper No.
The position of the damper and the print head
(Top view of head)
B
A
B
A
Damper
Head 1
Head 2
Pump Cap Damper
Pump 1 Pump 2 Cap 1
Cap 2
The position of the cap
(Top view of cap)
The position of the pump
(Front view of machine)
<LOCAL. 1> [#01]
FUNCTION
#ADJUST <ENT>
#ADJUST
EXCHANGE PARTS <ent>
[FUNCTION]
#EXCHANGE PARTS
REGISTRATION <ent>
HISTORY <ent>
[] / []: Changes items
[ENTER]: Finalizes (To the next
screen.)
#EXCHANGE PARTS
PARTS :PUMP
:CAP
:DUMPER
[] / []: Switches the names of
parts.
[ENTER]: Finalizes (To the next
screen.)
*PUMP
00.00.?? :No.1
MAINTENANCE MANUAL > Adjustment Items > Adjustment Function > REPLACE PARTS
Model
TS34-1800A
Issued
2011.10.17
Revised F/W ver.
1.20
Remark
1.0
To Next Page
Loading...
