MIMAKI TS34-1800A - Fan Motor

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.4.14 P.1
1
2
3
4
5
6
7
8
6.4.14 Fan Motor
 Work procedures
1. Remove the front cover and Y cover F.
2. Remove the platen cover F.
3. Remove the FAN duct V1 by lifting it obliquely.
4. Remove the screws with a ratchet or stubby screwdriver,
disconnect the connector and remove the adsorption fan assy.
5. Reverse the disassembly procedure for reassembly.
Turn the main power OFF when turning the power OFF.
It is very dangerous if sleep mode functions mistakenly during the operation.
Absorption Fan Assy
FAN Duct V1
Adsorption Fan Assy
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > Fan Motor
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.