MIMAKI TS34-1800A - Pump Assy

© 2011 MIMAKI ENGINEERING CO.,LTD. 6.2.4 P.1
1
2
3
4
5
6
7
8
6.2.4 Pump Assy
 Work procedures
1. Remove the station cover U34.
2.
3. Remove the pump tube connected to the cap head.
4. Remove the pump motor assy connector and then remove the
pump assy. (6.2.4??)
Pump Assy
Take care not to pollute the surroundings with waste
ink or washing liquid.
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Pump Assy
Model TS34-1800A Issued 2011.10.17 Revised F/W ver 1.20 Remark
1.0
Rev.