3
Introduction
Thank you for purchasing the UV inkjet printer UJV100-160.
Thoroughly read this safety precautions (“this document” hereinafter) and make sure you understand its
contents to ensure safe and correct use of the product.
Unauthorized reproduction of any of the contents of this document is prohibited.
© 2020 MIMAKI ENGINEERING Co., Ltd.
l
Disclaimers
• Mimaki Engineering shall accept no liability for any damage occurring directly or indirectly as a result of
using the UJV100-160 (hereinafter referred to “this product”) irrespective of whether or not the product
was faulty. Mimaki Engineering rejects all liability for damage, whether direct or indirect, resulting from
use of this product.
• Mimaki Engineering rejects all liability for damage, whether direct or indirect, attributable to materials
created while using this product.
• Using this product in conjunction with devices other than those recommended by Mimaki Engineering
may result in fire or accidents. Such incidents are not covered by the warranty. Likewise, Mimaki
Engineering rejects all liability for any damage, direct or indirect, arising from such incidents.
• Be sure to use genuine Mimaki Engineering ink and maintenance cleaning solution. Use of other
products may cause failures or reduce print quality. Disregarding this precaution will void the warranty.
Likewise, Mimaki Engineering rejects all liability for any damage, direct or indirect, arising from such
incidents.
• Do not attempt to refill the ink bottles with unauthorized ink. Disregarding this precaution will void the
warranty. Likewise, Mimaki Engineering rejects all liability for any damage, direct or indirect, arising from
such incidents.
• Avoid using UV-LED units or UV power supply units other than those specified by Mimaki Engineering.
Using devices other than genuine Mimaki Engineering devices may result in failure, electric shock, or
fire. Disregarding this precaution will void the warranty. Likewise, Mimaki Engineering rejects all liability
for any damage, direct or indirect, arising from such incidents.
l
TV and radio interference
• This product emits high-frequency electromagnetic radiation while operating. Under certain
circumstances, this may result in TV or radio interference. We make no guarantees that this
product will not affect special radio or TV equipment.
If you suspect that this product is causing radio or TV interference, check by powering off this product. If the
interference disappears when the power is turned off, this product is likely to be the cause of the
interference.
Try any of the following solutions or combinations of these solutions:
• Change the orientation of the TV or radio antenna to find a position where interference does not occur.
• Move the TV or radio away from this product.
• Plug the TV or radio into a power outlet on a different power circuit to this product.
l
FCC (Federal Communications Commission) regulations
This product has been tested and certified to comply with restrictions applying to Class A digital devices
under Part 15 of the FCC regulations. These restrictions are designed to provide suitable protection from
harmful interference when the printer is used in commercial environments.
This product may generate, use, or emit radio frequency energy and may cause harmful interference with
radio communications if not installed or used in accordance with the operating manual.
To Next Page
Loading...
Need help?
General