Mimosa Backhaul Help Content
Mimosa Backhaul Performance
Copyright © 2014 Mimosa Page 17
Tx MAC Throughput (Mbps) = 1560 * 50% * 80% = 624 Mbps
Rx MAC Throughput (Mbps) = 1300 * 50% * 80% = 520 Mbps
Note: The built-in Bandwidth test on the radio (Diagnostics > Tests > Bandwidth) displays UDP results,
Note: The built-in Bandwidth test on the radio (Diagnostics > Tests > Bandwidth) displays UDP results,
which should closely match the MAC Throughput shown on the Dashboard. The UDP protocol is
which should closely match the MAC Throughput shown on the Dashboard. The UDP protocol is
connection-less and unidirectional, whereas the TCP protocol requires bi-directional communication and
connection-less and unidirectional, whereas the TCP protocol requires bi-directional communication and
acknowledgements (ACK) from the remote host in response to a transmission.
acknowledgements (ACK) from the remote host in response to a transmission.
Related:
Calculating TCP Performance - Understanding and optimizing for TCP traffic
TDMA Configuration - Link Configuration in Backhaul User Guide
To Next Page
Loading...
Need help?
General
