Mindeo CS2190 - Upc-E

39
3-9 UPC-E
Read:
Format
System character “0”
Data digits (6 digits)
Check digits
Check digit verification: The check digit verification is optional and made as the sum of the numerical
value of the data digits.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Refer to Code ID setting of 3-11 UPC-A .
Insertion group selection: Refer to Insertion group selection of 3-11 UPC-A .
Supplement digits:
Format
System character “0”
Data digits (6 digits)
Check digit
Supplement digits 2 or 5
Truncation/Expansion:
Truncate leading zeros- Refer to Truncation/Expansion of 3-11 UPC-A .
Expand to EAN-13- It extends to 13-digits with “0” digits when the feature is set to be enabled.
Example: Barcode “0123654”,
Output: “0012360000057”.
Expand to UPC-A- It extends to 12-digits when the feature is set to be enabled.
Truncate system character- The system character “0” of UPC-E data can be truncated when the
feature is enabled.
Add country code- The country code (“0” for USA) can be added when the feature is enabled.
SETUP
Option bar code
Option
Alpha. entry
Single-scan setting
Read
Disable
00
Enable
01*
*
Check digit verification
Disable
00
Enable
01*
*