Need help?Do you have a question about the Mindeo ES4650 and is the answer not in the manual?
Details hardware specifications like dimensions, weight, materials, interface, and performance metrics.
Lists default read enable, check digit, and code ID settings for various barcode types.
Identifies key components of the scanner, including the trigger, beeper, and CMOS sensor.
Details the RJ-45 connector pin assignments for RS-232 and USB interfaces.
Explains typical input/output behavior and provides circuit diagrams for LDO and switching regulators.
Provides diagrams and dimensions for physically mounting the embedded scanner.
Details optimal scan window distances and angles for effective barcode reading.
Details timing characteristics and waveforms for scanner operation.
Explains basic scanner operations like beeping, request revision, and decoding methods.
Introduces programmable parameters and methods for changing them via barcodes or commands.
Explains how to set single parameters using 1D barcodes with single-scan and multiple-scan methods.
Describes how to customize a QR code to set multiple scanner parameters simultaneously.
Details flow control options and communication parameters for the RS-232 interface.
Explains USB device types (HID keyboard, Virtual COM) and keyboard layout options.
Configures scanner behavior like scan mode, auto-detection, and delay times.
Configures settings specific to the UPC-A barcode symbology.
Configures settings for Code 39, Code 32, and Trioptic Code 39 symbologies.
Configures settings for the Code 128 barcode symbology, including truncation of leading zeros.
Explains GS1 Composite symbols and their enabled versions.
Details the syntax for single-parameter and multiple-parameter setting commands.
Provides examples of constructing and transmitting commands for scanner configuration.
Enables transmission of "NR" when STOP_DECODE command is received or decoding fails.
Disables the transmission of "NR" status.
Enables the scanner to operate configuration via scanning barcodes.
Disables configuration by scanning barcodes, displaying data string instead.
To Next Page
General
