Mindeo ES4650 - Multiple-Parameter Setting; Query Command Syntax

102
4-1-2 Multiple-parameter setting
Format
Prefix
Parameter index 1
D/H
Value 1
;
···
Parameter index N
D/H
Value N
Storage
Prefix: Refer to Prefix of 4-1-1Single-parameter setting.
Parameter index 1 to Parameter index N: Refer to Parameter index of 4-1-1Single-parameter setting.
D/H: Refer to D/H of 4-1-1Single-parameter setting.
Value 1 to Value N: Refer to Value of 4-1-1Single-parameter setting.
Storage: Refer to Storage of 4-1-1Single-parameter setting.
Example: Set 0401->03 (decimal), 8002->0D0A (hexadecimal). The command is as following.
Prefix
Parameter index
D
Value
;
Parameter index
H
Value
.
0x16 0x4D 0x0D
0x30 0x34
0x30 0x31
0x44
0x30
0x33
0x3B
0x38 0x30
0x30 0x32
0x48
0x30 0x44
0x30 0x41
0x2E
4-1-3 Query command syntax
Format
Prefix
Parameter index
^/?/*
.
Prefix: Refer to Prefix of 4-1-1Single-parameter setting.
Parameter index: Refer to Parameter index of 4-1-1Single-parameter setting.
^/?/*: Several special characters can be used to query the embedded scanner about its settings.
^ (0x5E)
Read the default value for the parameter
? (0x3F)
Read the current value for the setting.
* (0x2A)
Read the range of possible values for the parameter.