Mindeo ES4650 - Indication

29
3-7 Indication
Power on alert: After power-on the embedded scanner will generate an alert signal to indicate a
successful self-test.
Beeper indication: After each successful reading, the embedded scanner will beep to indicate a good
barcode reading, and its beep tone duration is adjustable.
Beep on BEL Character: The embedded scanner will beep upon a <BEL> (0x07) character from the
host if it is enabled.
Multiple-scan setting
Single-scan setting
Option barcode
Option
Alpha. entry
Power on alert
Disable
00
Enable
01*
*
Beeper indication
Disable
00
Enable
01*
*
Beep on BEL Character
Disable
00
Enable
01*
*