These guidelines do NOT replace the instructions for use and all users should refer to the appropriate Operator’s Manual for detailed instructions.
The Illustrations may not necessarily reflect the setup or data displayed on your device.
BeneHeart R3 Clinical Education Pack SWL 02.07_V1 Mindray UK © 2020. Errors and omissions excepted. Subject to change.
Mindray® is a registered trademark of Shenzhen Mindray Bio-Medical Electronics Co. Ltd.
8
Accessing the Main Menu
• Press the [Menu] key (number 2) on the operating panel to access the main menu.
• Press [F2] or [F3] to select the desired menu item.
• Press [F4] to confirm the selection.
• You can return to previous menu by pressing [F1].
In the main menu you can:
• Configure waveforms
• Configure recordings
• Manage files
• Customise patient information
• Perform system setup
The settings in the main menu are saved as user defaults and remain effective even after the
equipment is turned off.
Changes made to the Speed or Gain using the [F1] and [F2] quick keys will return to the main menu
settings when the device is switched off. Therefore it is advisable to use these keys to make changes
for individual patients in order to leave the default settings unaltered.
Please see the BeneHeart R3 Operators Manual for the full list of menu functions.
Section 5
System Setup
To Next Page
Loading...
Need help?
General
