11-8 DICOM/HL7
Select an item in the service list, change the parameters in the above area, and click [Update]
to update the item in the service list; click [Cancel] to cancel changing.
Select an item in the service list, and click [Delete] to delete the service.
Select an item in the service list, and click [Default] to set the server to be the default service.
HL7 service setting for Worklist is described as follows:
After you set the server (s) in DICOM Server Setting
screen, the name (s) will appear in the drop-down list,
select the name of the Worklist server.
Default is server-HL7Query, and it can be modified.
Application Entity title.here, it should be consistent with
that of the HL7 server.
DICOM communication port, 104 by default.Here, the
port should be consistent with that of the HL7 server
port.
Refers to time after which the system will stop trying to
establish a connection to the service.Value: 5－60s, in
increments of 5, and 15 by default.
To Next Page
Loading...
Need help?
General
