DICOM/HL7 11-9
The ultrasound device starts using the monitoring port
to receive the date after the monitoring mode is
enabled.
In monitoring mode, the ultrasound system sends the
information as the user end; it monitors the result via
the port as the service end.
In non-monitoring mode, the ultrasound system sends
the query information and receives the query result as
the user end; the monitoring mode is not chosen by
default.
It is the port to receiving the data for the ultrasound
system after the monitoring mode is enabled.Here, the
port should be consistent with that of the HL7 server
port.
See the server settings for the monitoring port.
Click to add the Worklist service to the service list.
Click to cancel the parameter setting.
Select an item in the service list, change the
parameters in the above area, and click [Update] to
update the item in the service list.
Click to delete the selected service in the service list.
Select an item in the service list, click [Default] and you
can see ―Y‖ in the Default column.
To Next Page
Loading...
Need help?
General
