Mindray DC-80 EXP

Probes and Biopsy 13-17
Plastic/needle detachable needle-guided bracket:
No.
Name
Description
<1>
Support of needle-
guided bracket
Used for installing the needle-guided bracket on the probe.
<2>
Angle block
Used for determining the angle of the biopsy; there are three
specifications of blocks of angle.
<3>
Guiding block
Used for installing biopsy needle; there are five specifications of
guiding blocks for different biopsy needles.
<4>
Groove and tab of the
needle-guided bracket
Respectively matches with the tab and groove of the probe.
<5>
Specification of
guiding block (13G)
Matched with the corresponding biopsy needle (13G).
<6>
Guiding hole of the
biopsy needle
Used for installing the biopsy needle.
<7>
Specification of angle
block (60°)
The corresponding biopsy angle is 60°.