Mindray DC-80 EXP User Manual

E-2 Barcode Reader
2. Connect the other end of the interface cable to the host.
1.
Cable interface port
2.
Interface cable modular connector
E.1.3 Setting
The reader has factory settings; please refer to A.4 for details.
The reader supports some user-defined functions as introduced below.
For more details, please contact the SYMBOL reader agents or Mindray Customer Service Department.
 Volume setting:
Scan the following barcode to set the volume parameter.
 code 93 and codebar scanning:
To enable or disable Code 93, scan the appropriate barcode below.

Mindray DC-80 EXP Specifications

General

Touchscreen	Yes
Transducer Ports	4
Power Supply	100-240V AC, 50/60 Hz
Imaging Modes	Color Doppler, Power Doppler
Operating System	Windows
Storage	1 TB HDD
Connectivity	DICOM, Ethernet, USB
Applications	General Imaging, Cardiology, Vascular, Pediatrics
Weight	85 kg