S-7
7. You can record the registration data (including the hospital data and patient
data). To ensure the security of the data, be sure to back up the data on
external storage media. Data stored in the system may be lost due to
improper operation or an accident.
8. Do not apply external force to the control panel (e.g. leaning against it).
Otherwise it may damage the system.
9. If the system is used in a small room, the room temperature may rise.
Therefore, proper ventilation shall be provided.
10. The fuse, which is inside the machine, can be replaced only by the Mindray
service engineer or the technician specified by Mindray.
11. When disposing of this system or any part of the system, contact Mindray
sales office, customer service department or representative. Do not dispose
of this system without consulting Mindray sales office, customer service
department or representative first. Mindray does not assume any
responsibility for damage resulting from disposal of this system without
consulting Mindray.
12. Deterioration of electrical and mechanical safety characteristics (such as
generation of a leakage current or deformation/abrasion of mechanical
parts) and of image sensitivity and resolution may occur over a period of
time. To ensure system performance, signing a maintenance and service
contract to avoid accidents and misdiagnose is recommended.
13. The output power outlets on the main unit are used for providing power to
recommended external optional devices. Do not connect other devices to
the outlets, otherwise the output power may be exceeded and the system
may malfunction.
4. Warning Labels
Various WARNING labels are attached to this system in order to call the user's attention to
potential hazards.
The symbol
on the WARNING labels attached to the system indicates safety
precautions.
The name, appearance, and the indication of each WARNING label are described in the
Operation Manual. Read them carefully and understand them.
To Next Page
Loading...
