P/N: 046-003757-00 Rev A
Quick Reference Guide
3
automatically places the bedside monitor and ViewStation in standby. Select
any key on the front panel or select the display to remove patient from
Standby on the DPM 6 or DPM 7 bedside monitor.
Note: A patient cannot be removed from Standby from the Central Station.
The patient must be removed from Standby at the DPM 6 or DPM 7 bedside
monitor.
RECORD
Real-Time Waveforms
To record a strip on a patient at the DPM 6 or DPM 7 bedside monitor's
integrated recorder:
a. Select REC on the monitor’s front keypad
Adjust Recorder’s Waveforms
To adjust the waveforms recorded on a patient at the DPM 6 or DPM 7 bedside
monitor's integrated recorder:
a. Main Menu
(quick key)
b. Select Record Setup menu
c. Select Waveform 1, Waveform 2, or Waveform 3
d. Select the waveforms for recording from drop down list or select off to
turn off waveform recording
e. Select Main Menu
(quick key) or to return to the main display
PRINT
Real-Time Waveforms
To print a strip on a patient at the DPM 6 or DPM 7 bedside monitor to a
predetermined laser printer:
a. Select Real-Time Print (quick key)
Panorama® Central Station interface: Selecting Real-Time Print at the DPM 6 or
DPM 7 bedside monitor will print a 10-second, All Strips Report on the Panorama®
Central Station. The waveforms printed are determined by the Print Setup tab
at the Panorama® Central Station. Waveform print selection on the Panorama®
Central Station, WorkStation, and ViewStation are independent.
To Next Page
Loading...
Need help?
General
