6-2 Software Installation &Maintenance
Log on the system with the identity of Service before perform system maintenance.
1. Press [Setup]. Select [Maintenance] → [Setup] → [Installment]. Click [Set Installment], and set
the times of the installment in “Periods” list. Set the time interval of each installment in “Days”
list, as shown below.
2. Click [Generate], and tick off “Display Password”. The password generated by the system will
be displayed in “Password List”, as shown below.
Take the Figure above as an example.
Note: the first time installment is the down payment.
a) The system creates each 4 installment password for 4 times installment.
b) First installment password:
After the user paying off the down payment, the installment dialog box appears after
turning on the device. Enter this password in “Period Password”, and click “Start” to log in
the system.
To Next Page
Loading...
Need help?
General
