System Installation 3-17
7. Click [Have Disk] to find the driver path (the installation type should be WIN64), and
then click [Next] to install the driver.
8. Complete the operation according to the tips on the screen. Click [Finish] to end the
installation.
NOTE: 1.
Before adding the local printer, make sure the printer is powered on, and the
printer has been well connected with the ultrasound device (a sound
feedback will be heard when connecting)
In case of installation failure under Doppler, try to install the printer in
Windows (click [Enter Windows] on the Maintenance menu). If the
installation can’t be performed neither in Doppler nor Windows, then the
printer can’t be supported by the ultrasound machine.
Use the original driver disk to perform the driver installation.
Add network printer
1. As the system is connected into a LAN, open [Setup]-> [Printer Preset] screen.
To Next Page
Loading...
Need help?
General
