5-92 Image Optimization
Where, the X-axis represents time and Y-axis represents pressure.
5.14.1.4 Parameter adjusting
ROI Adjustment
Description To adjust the width and position of ROI in Elasto imaging.
Operation When the ROI box is solid line, roll the trackball to change its position.
When the ROI box is dotted line, roll the trackball to change the size.
Press <Set> to switch between the solid line and the dotted line status.
Smooth
Description To adjust the smooth feature of the Elasto image.
Operation Tap [Smooth] on the touch screen to adjust the parameters.
The system provides 5 levels of smooth function. The bigger the value is, the higher
the smooth becomes.
Opacity
Description To adjust the opacity feature of the Elasto image.
Operation Turn the knob under [Opacity] on the touch screen to complete the adjustment.
The system provides 5 levels of opacity function: the bigger the value the stronger
the effect.
Invert
Description To invert the E color bar and therefore invert the colors of benign and malignant
tissue.
Operation Tap [Invert] on the touch screen.
Display Format
Description Adjust the display format of ultrasound image and the Elasto image.
Operation Tap [H 1:1], [V 1:1], [Full] on the touch screen to adjust.
The system provides 3 types of display format:
H 1:1: right and left display (the real-time ultrasound image appears on the left, and
the elasto image appears on the right);
V 1:1: up down display (the elasto image appears above, and the real-time ultrasound
image appears below).
Full: the elasto image only displayed.
Adjust according to the actual situation and obtain a desired analysis through
comparison.
Map
To select different maps for observation.
To Next Page
Loading...
