Mindray Resona I9 - Page 363

Probes and Biopsy 13-43
NGB-034
 Separation of the needle in the operation
1. Pull the lock pin out until the V-shaped cover can be turned and opened up.
2. Turn over the V-shaped cover to expose the needle. Remove the probe and bracket.
 Removing the needle-guided bracket
Screw the pinch nut to release the needle-guided bracket.
NGB-024
1. Hold the transducer. Press the biopsy needle to separate the needle from pressure position of the
needle.
2. Separate the bracket and the transducer from the needle.