Mindray VS-800 - Page 64

Machine test and Material List
5-4
35 6006-21-39391 SPO2 signal line (MASIMO)
36 6006-21-39392 SPO2 signal line (NELLCOR)
37 6006-30-39393 Power board (lithium)
38 6006-20-39394A PCB board for power board
39 6006-30-39399 12V DC/DC board
40 6006-20-39400A PCB board for 12V DC/DC board
41 6006-30-39401 Master bracket assembly (lead-acid)
42 6006-30-39402 Master bracket assembly (lithium)
43 6006-30-39403 Main unit (lead-acid/SpO2 only)
44 6006-30-39404 Main unit (lithium/SpO2 only)
45 6006-30-39405 Main unit (lead-acid/NIBP)
46 6006-30-39406 Main unit (lithium/NIBP)
47 6006-30-39407 Main unit (lead-acid/ overpressure mode)
48 6006-30-39408 Main unit (lithium/overpressure mode)
49 6006-20-39413 Master transformer
50 6006-20-39414 3.3V DC/DC inductor
51 6006-20-39415 Silicon power button
52 6006-20-39416 Master bracket (lithium)
53 6006-20-39417 Lithium battery fixed bracket
54 6006-20-39418 Speaker press plate
55 6006-20-39419 Lead-acid battery fixed bracket
56 6006-20-39420 Overlay of front housing (English)
57 6006-20-39421 Overlay of external interface
58 6006-20-39422 Heat sink for switching tube
59 6006-20-39423 Heat sink for rectifier tube
60 6006-20-39424 Heat sink for charging switch tube
61 6006-30-39427 Lithium battery socket board
62 6006-20-39428A PCB board of lithium battery socket
63 6006-20-39429 Overly of front housing (Chinese)
64 6006-20-39431 Silicon keypad press plate
65 6006-20-39432 Bolster plate for middle LED (bottom)
66 6006-20-39433 Bolster plate for small LED (right)
67 6006-20-39434 Fan press plate
68 6006-20-39435 Recorder cap
69 6006-20-39436 VS-800 Operation Manual (Chinese)
70 6006-20-39437 VS-800 Operation Manual (English)
71 6006-20-39438 VS-800 Maintenance Manual (Chinese)
72 6006-20-39439 VS-800 Maintenance Manual (English)
73 6006-20-39440 VS-800 Operation Card (Chinese)
74 6006-20-39441 VS-800 Operation Card (English)
75 6006-20-39442 Operation Manual (Chinese/OEM)
76 6006-20-39443 Operation Manual (English/OEM)