For safe operation
Be sure to read this instruction manual before use.
1. Installation place
Caution
● Environmental temperature : －10 ℃ to 50 ℃
● Environmental humidity : 85 %RH or less (Non condensing)
Warning
① Location where installation is not allowed.
● Don’t locate the instrument in direct sunshine and/or high temperature area.
● Don’t use the instrument in the high humid area.
● Don’t install the instrument in the place with the vibrations and shock.
● Don’t use the instrument where there is excess of dusts and fine particles.
● Don’t use the instrument where there are corrosive gas and salt and like that.
● Don’t install the instrument where there is rapid charge of temperature and humidity.
● Don’t install the instrument near the devices that are magnetized or generate an
electromagnetic field.
● Don’t install the instrument where the instrument may be affected by radioactivity or radial
rays.
● Avoid the location where chemical reaction may take place such as in a laboratory, or like that.
The temperature and humidity must use it in the place within the following ranges.
Do not set up this instrument in the following places. It might cause an unexpected faulty in the instrument.
To Next Page
Loading...