F3 Operations Manual
22
4.2 Standard Procedure. After unpacking the F3 and
preparing it for use as described in Chapter 2 (appropriate
Sensitivity Endcap fitted as directed by the local authority),
complete the THREE step standard procedure as follows:
On/Off
Switch
Ground
Balance/
Audio Reset
Button
Noise
Cancel
Button
P0621-A
Earset
Socket
Figure 14: F3 Controls
a. STEP 1 Switch ON
Hold the coil at least 600mm (24ins) from the ground and away
from any metallic objects. Turn the detector on by sliding the
On/Off switch back towards the handle.
To Next Page
Loading...
