F3 Operations Manual
37
4.6 Multiple Targets. There may be occasions when an
operator will encounter multiple targets. For example, small anti-
personnel mines may be laid in a cluster, or a large anti-tank mine
may be surrounded by smaller anti-personnel mines or booby-traps.
Regardless, the pin-pointing procedure for the F3 can be used to
effectively map a suspicious area as follows:
a. STEP 1 Mapping the Target
Using the procedure described in Section 4.5.a, an area
enclosing the multiple targets can be mapped.
Figure 25: Mapping Multiple Targets
NOTE
To an experienced operator the shape of the mapped area can
indicate whether multiple targets may be present.
To Next Page
Loading...
