Minelab F3

F3 Operations Manual
7
2.2 F3 Main Components. Figure 4 identifies the main
components of the F3 which comprise:
P0635-A
Skidplate
Coil
Lower
Shaft
Middle
Shaft
Handle
Armrest
Armrest
Strap
Endcap
Electronics
Pack
Battery
Pack
Upper
Shaft
Middle
Camlock
Upper
Camlock
Lower
Camlock
Figure 4: F3 – Major Components
a. Sensitivity Endcap – the sensitivity of the F3 can be changed by
using either the Black (maximum) or Red (minimum) Endcaps.
b. Armrest Strap – provided for operator comfort when the F3 is
used for prolonged periods.
c. Armrest – adjustable (via a camlock) to maximise comfort of use
for an operator.